Электрический стеклянный чайник с Европейским сертификатом контроллер влажности переключатель

Описание и отзывы

Трекер стоимости

Характеристики

EU certification Electric Glass Kettle CE Humidity Controller Thermostat Control Switch 

 

 

Using Method :                                                              

Notice:

-When water is boiling, hot steam will emit from spout and lid (when using steamer), keep your face and hands at least 1ft distance from spout, lid and hot part. Meanwhile, spout, kettle, lid, steamer, steamer pad, tea filter, stew pot and stew pot lid are very hot during use and after use, do not touch with hands directly to avoid scalding.

-When using boil water, flora tea, herb tea, sweet soup program, never fill water with ingredients over 1.5L Max level indication ; and when using stew, bird nest, steam program, neve fill water over 1.0L Max level indication to avoid water overflow from spout and lid to cause scalding. Never fill water below 0.5L Min water level indication, and never operate without water.

-Never use for any other cooking method such fry, deep-fry, etc, or for other purpose use to avoid accident or product damages.

-Do not move the appliance when operating.

 

1. Read and understanding the warning and caution parts clearly before use.

 

2. Put the base on a flat and heat resistant surface, do not connect the power plug.

 

3. According to the needs, set up the accessories, fill water and ingredients into kettle and accessories.

 

4. When preparation finish, put and align the lid on kettle or steamer.

 

5. Put the kettle on the base.

 

6. Connect the power plug with power supply socket, when power connected, display shows all indication and dim afterward, then display shows “OFF”, which means appliance is now at standby (OFF) status.

Notice:

- When power connected, anytime when you hold up the kettle from base, the appliance sounds and alarm, and display shows “E1”. This is not an error.

- At standby (OFF) status without any button operating after 5 mins, appliance will automatically enter sleeping status, display dim. Press On button to activate the appliance and enter into standby (OFF) status.

 

7. At standby (OFF) status, set the preset, program time, power or temperature setting. 5 seconds after setting, appliance will start the program.

8. When program countdown finished, appliance sounds an alarm, and enter 24 hours keep warm program automatically. When 24 hours keep warm countdown finish, appliance will enter standby (OFF) status, display shows “OFF”, 5 mins without any button operating, appliance enter into sleeping status, display dim.

Anytime including appliance at setting mode, during setting, any program is operating (include keep warm program) that you want to stop operating, press Standby (OFF)

Button, appliance stop operating immediately, and enter standby (OFF) status, display shows “OFF”.

Notice:

- If you hold up the kettle from base when appliance is operating 24 hours keep warm program or other program, the appliance start memory function, if you put back the kettle on the base within 10 mins, the appliance will keep operate the program. Of you don’t put back the kettle on the base after 10mins, the appliance will enter sleeping mode, display dim.

 

9. When finish using, unplug from power supply socket, then start appliance handling.

Notice:

- There is a lot of hot steam when you open the lid or stew pot lid, and there is lot of hot water dropping from bottom of lid, steamer , steamer pad, tea filter, stew pot and stew pod lid, handle with care.

 

10. After finish using, wait the kettle and all accessories completely cool down before cleaning.

 

Specification :                                                              

 

Technical Parameters		Packing Parameters
Power	600W	Product Size (mm)	232*216*230
Voltage/Frequency	AC 100-240V 50/60Hz	Gift Box (mm)	261*238*232
Capacity	1.5L	Master Carton (mm)	737*543*490
Control Mode	Microcomputer control	Packing Inside	12 pcs/Carton