Медицинский Одноразовый инфузионный набор Iv внутривенный с

Product name

infusion set

Type

conventional

Specification model

120cm, 130cm, 150cm

Purpose

injection

Sterilization method

ethylene oxide sterilization

Packaging

independent packaging, optional PE or paper-plastic packaging

Composition

plastic cork, cork protective cover, air inlet device (with air filter membrane), water inlet hose, hose, dropper, dropper, flow
regulator, chemical filter (nominal pore size 15µm), Straight, needle tube, puncture needle

Usage

1. Open the small package along the opened seal, remove the infusion set, close the regulator, remove the puncture protective
cover, and insert the cork into the container stopper vertically; 2. Open the regulator, empty the gas in the pipeline, close the
regulator, and then perform intravenous injection; 3. After dropping the plastic, turn on the regulator to adjust the infusion
volume.

Note

1. This product can only be used for gravity infusion; 2. During use, check whether the packaging bag is complete, such as whether
the packaging is damaged, whether the accessories have fallen off, and whether there are foreign objects in the packaging bag; 3.
This product is for one-time use and destroyed after use.

Advantages

1. You can choose a flexible infusion set, the pipeline of the infusion set is not easy to be damaged or branded in a place with
extremely low temperature; 2. The drip bucket is made of high-quality raw materials, with good transparency and easy to observe
the dripping speed; 3. Selected stainless steel materials, polished needles, smooth edges without burrs, exquisite double bevel
design, reduce patient discomfort, small tissue wounds, and easy to heal.