Усилитель мощности AIYIMA HiFi BT 5 0 2 каналов звуковой усилитель декодер стерео USB оптимизированный коаксиальный для настольного компьютера 200

Product Name: BT 5.0 U Disk Coaxial Optical Fiber Input Decoding Power Amplifier
Chipset: TPA3221+NE5532P+AC6926+MS8412
BT chip: JL6925C BT 5.0
Support: MP3/WMA/APE/FLAC/WAV
Op amp chip NE5532--replaceable op amp chip: OPA2604, OPA2314, LM4562, JRC5532, etc.
Remote operation---infrared remote control
Fiber/coaxial sampling rate: 24bit192khz
U disk support format: MP3/WMA/APE/FLAC/WAV
Maximum storage capacity of U disk: 32G
Signal to noise ratio: ≥98db
Input sensitivity: 0.775V
Distortion: 0.08%
Frequency response: 20-20Khz (±1db)
Speaker impedance: 3-8Ω (left and right channels)
High, middle and low pitch: ±6db
Output power: 100W*2 (4Ω load)
Maximum output power: 200W
Input mode: RCA (such as CD player, DAC decoder, mobile phone, TV, etc., red connection R, white connection L)/BT/U disk (when the U disk is inserted, it will automatically switch and play)/Optical/Coaxial(USB Only applicable to U disk, does not support hard disk, does not support PC-USB)
Support equipment: mobile phones, tablets, computers, MP3, TV, etc.
Speaker output: connect passive speakers (constant impedance speakers) (red connection +/black connection -, R is the right channel, L is the left channel)
Working power supply: DC18-30V, 3A or more (DC input voltage should not be higher than 30V) DC24V 8A Supply Power is recommended, because the greater the current, the dynamic output of the speaker will be better and the output power will be more sufficient.
Size: 128*133*33mm

Package included:
1Pcs BT 5.0 U Disk Coaxial Optical Fiber Input Decoding Power Amplifier
1Pcs DC24V Power Adapter (Depends on your choice)