4 порта PoE инжектор питания адаптер Ethernet вытащить шпильку 5(+)/7/8(-) вход DC12V-DC48V для IP

Important Tips Before Purchase:

This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable. This PoE injector is compatible with IEEE802.3af/at network devices.

it does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan.

Power Input = Power Output*channels

Take 4Port POE injector as example: DC48V 4A Input = DC12 V1A Output per channel, DC48V 2A Input = DC48V 0.5A output per channel. If you only use 3 of 4 channels, DC12V3 A input = DC12V 1A output per channel.

Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.

This POE adapter apply for IEEE802.3af/at standard POE powered devices like DAHUA, HIKVISION and other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices.

This poe injector should be equipped with a power supply, this package does not include power supply, if you do not have it, you need to purchase per your need.

Input voltage : 9-48V DC, 1-4A

Output voltage: 9-48V DC, 0.5A each port

Netowrk standards : IEEE802.3i 10BASE-T, IEEE802.3i 100 BASE-TX

POE Power : wiring :Data provided over pairs 12&36 and power provided over 45(+)&78(-)

          Cable: UTP cat.5 or higher

Processing types: store-and forwarder

               Half-duplex back pressure and IEEE802.3X full-duplex flow control

Data rate: 10/100Mbps

Installation : plug and play installation

Led indicator :Power

Working tem: -10degree to 45 degree

Storage tem: -10 degreee to 70 degree

Operating humidity : 20%-85% , non-condensing