Repair range:car lights scratches, oxidized yellow, fuzzy, other oxidation, etc.
Repair Tips:
* Sanding:Use the sanding discs from coarse to fine P800→P1200→P2000 to rub with water.
Note: make a completely removal of the heavy yellowing,fading and corrosion
Restoration:Spray the restoration liquid on kit, till dry.
Note:When spray better to wear mask
Repair steps:
* Thoroughly clean headlight lens and dry with clean towel
* Use masking tape to protect nearby painted surfaces
* (sanding with water strongly, then wipe off, make sure every margin is polished, change the drinding direction after each
sanding. 190#(3times) 320#(twice) 600(twice) 1000#(twice)- 1500(twice)
* Wipe off the impurity with towel and dry the lens with a clean towel. Now you get a smooth, even and white polish surface.
Check thoroughly to ensure no sandpaper marks
* Add 80-100ml headlight restorer to heating jug and cover with the lid
Ohmic heating for about 5-6 minutes until there is steam giving off * Thoroughly clean headlight lens and dry with clean towel
* Use masking tape to protect nearby painted surfaces
* (sanding with water strongly, then wipe off, make sure every margin is polished, change the drinding direction after each
sanding. 190#(3times) 320#(twice) 600(twice) 1000#(twice)- 1500(twice)
* Wipe off the impurity with towel and dry the lens with a clean towel. Now you get a smooth, even and white polish surface.
Check thoroughly to ensure no sandpaper marks
* Add 80-100ml headlight restorer to heating jug and cover with the lid
Ohmic heating for about 5-6 minutes until there is steam giving off