Сантехника керамическая скользящая бак давления для подачи скольжения на

 The slurry slip pressure feeding serving tank is used to heat slurry for casting, transporting the slip by pressure air to casting bench or high pressure casting machine for sanitary ware toilet, wash basin, cabinet and so on.

The machine includes the following parts:
Tank Body:
The slurry tank body consist of sealing head, tank body and flanges, glass fiber is used for anti-corrosion inside the tank. The inspecting hole is located on the side of the tank, as well as pressure gauge, safety valve, overflow pipe, radar level probe and the connection pipes to the pressure air.
Heating System:
The heating system consist of the S.S spiral pipe.
Mixing System:
The mixing system consist of the reducer, the base of reducer, a bearing base, a connecting shaft, a mixing shaft, a mechanical seal, a mixing
blade and a bottom fixing base.
Controlling System:
The control system is composed of a cabin, control mechanism, general switch, operation buttons, indicator lights and corresponding instruments.

Our Advantage: 

(1) Multiple Functions:
The slurry serving tank are multiple functions, such as vacuum treatment, heating, mixing and slurry delivery.
(2) Operated Easily:
The slurry serving tank is equipped with controlling system which could set the parameters of the slurry such as the temperature, the pressure in the tank, and the leftover slurry in the tank.
(3) Installation Ground Saving:
This slurry serving tank could save the installation ground.
(4) High Safety
a. This slurry serving tank equip with a radar level probe, which could show how much slurry left in the tank. The alarm will be triggered once
the slurry in the tank is too much or too little.
b. This slurry serving tank equip with pressure gauge and safety valve, which could show the pressure inside the tank.
c. This slurry serving tank equip with heat detection device, which could show the temperature of the slurry in the tank
d. The slurry serving tank equip glass fiber to prevent polluting to the slurry in the tank.
(5) Easily Maintenance
(6) Power Saving
(7) Highly Automatic Equipment

 How it works:
(1) Slurry Mixing:
The power is directly transmitted to the mixing blade through the coupling and the transmission shaft. The rotation of the mixing blade takes the slurry in the tank to continuously rotate and tumble.
(2) Slurry Heating:
A spiral water pipe is set inside the tank, and the external hot water circulates through the water pipe to heat the slurry
(3) Vacuum Pipeline Inside the tank
The vacuum pipelines are used for removing the bubbles in the slurry and improving the pass rate.
(4) Slurry Serving:
The slurry serving tank with the pipeline to the pressure air, which could use to deliver the slurry to the casting machine.