Одометр водонепроницаемый велосипедный компьютер с ЖК-дисплеем

Описание и отзывы

Трекер стоимости

Характеристики

Meilan M4 Wireless Bicycle Computer

ANT +;BLE4.0; Super Long Time of Usage;

Free Gift of Speed/Cadence Sensor;

Bicycle computer for both MTB and Road Bike; Super Economic;

1. 2.5-inch anti-glare large screen, which can be clearly displayed from all angles in the sun. White backlight, 2-level brightness which is adjustable;

High grade IML anti-scratch mirror; large screen display, which assures that data in high-speed operation can still be seen clearly at a glance;

2. Super long battery life smart computer, USB rechargeable, can be used for more than 100 hours after  being full charged. Input: DC 5V 0.5A;

3. With BLE 4.0 and ANT+ wireless connection, you can connect external devices: heart rate band, power meter, speed /cadence sensor, etc. to obtain more and more accurate data and plan your exercise plan reasonably.

Statement: the device supports heart rate and power data display, but the package does not contain these two external devices. Please try to purchase accessories of the same brand for connection. If the sensor of the same brand is not used, there may be other unknown risks such as no connection authority, and we will not be able to provide technical support. The device does not support the use of wireless heart rate band with 5.3KHz frequency transmission.

4. A set of  ble4.0 wireless speed / cadence sensor is included in the package of this device. The sensor has high requirements for installation, please operate according to the following rules:

A. The sensor and magnet must be fixed firmly to ensure that they will not shake or fall off when the bicycle is running at high speed;

B. After installation, please make sure that the gap between the corresponding speed sensor and cadence sensing part and the corresponding magnets does not exceed 2cm.

C. There are two small triangles on the sensor. Please make sure that the triangle is aligned with the center of the cadence magnet and speed magnet. If the center point is not aligned, the speed value may fall back to 0 for a short time after exceeding 40-60km / h;

D. Built in replaceable button battery CR2032 can be used for 6-9 months. The battery can be easily replaced with a coin. Each time you use it, you must first turn the wheel to wake up the device; if you do not use the device for more than 3 minutes, it will automatically enter the sleep state; when the displayed data is broken / continued, or when your phone BLE is turned on, it cannot be detected: the existence of “meilan-spd”; you may want to consider replacing a new battery;

E. Some bicycles have large flat fork span, same are most indoor sports bicycles. The riding platform is not suitable for installing this product. Please fully consider the feasibility of installation before purchasing;

5. Review of historical records

This device can store about 100 hours of riding data, you can long press the right button to view your riding record on this device; the exit of history interface is also to long press the right button;

 

Declaration: This product is not a GPS bicycle computer, with no track record stored;

6. The device can display up to 16 kinds of data: current time, riding time, current time, current / average / maximum speed, current / average / maximum cadence, current / average / maximum heart rate, power, temperature, calories, ODO;

7. This device only supports English menu display;

8. Support to store the information of two bicycles;

9. Support the switch between metric and Imperial Unit;

10. Automatic start/stop function;

11. Section recording function;

12. This equipment can be installed on the front handlebar and stem you can choose it at will.

13. The ultra-thin blade design reduces the wind resistance during high-speed riding and provides more guarantee during the race; Being installed on the road bike will be more elegant and flexible;

14. Waterproof grade: IPX5, suitable for small to medium rain environment, please do not immerse the product in water or heavy rain environment; please plug the USB cover during use;

15. Packing list:

M4 bicycle computer * 1pc

C3 wireless BLE4.0 speed /cadence sensor * 1pc

USB charging cable * 1pc

Fixed support * 1pc

Handle extension fixing bracket * 1pc

Instruction * 1pc

Precautions for use:

A. The M4 bicycle computer can only be used after it is paired with the sensor, and the rim circumference value can only be set after it is paired with the sensor;

B. The smart computer has the storage function. You only need to press the middle key to start recording each time you ride, and press the middle key to save data at the end of the ride. You can delete the data you don't need to save; the next ride will start recording from 0; you don't need to reset like the traditional bike computer;

C. Setting steps of Meilan M4 wireless bicycle computer:

01. Press the setting key on the rear shell to enter the setting mode:

Press the middle key to change the value, right key to enter the next item, and left key to return to the previous item.

 

02. Setting time: year- month- date

03. Switch between metric system and Imperial system: KM can be seen flashing. Press the middle key to switch to MI

04, Set the ODO data.

05, Set the personal weight (WGT) value.

06, Start pairing the sensors of the first bike (BI: 1).

07, Enter the rim circumference of the first bike.

08, Start pairing the sensors of the second bike (BI: 2).

09, Enter the rim circumference of the second bike.

10. Press the setting key on the back shell briefly to exit the setting interface;

 

When the icons of speed, cadence, heart rate and power are flashing, it means that M4 is searching for this kind of sensor; when the icon is not flashing, it means that M4 is successfully connected with this corresponding sensor; when all the sensors are successfully connected, it will display: SUCC; if you do not have all the sensors, you just need to confirm that the icons of the sensors you need to connect are always on (matching is successful), Or if you don't have the second bicycle information to match, you can press the setting key on the back shell to exit the setting menu;

 

"CLR pair" means to clear the pairing, and all pairing information will be cleared after pressing.