Special alloy hammer crushing technology. The crushing disc on the food waste disposer on the ordinary trash can uses an alloy hammer to crush the garbage with four actions of hammering, cutting, tearing and grinding. The garbage can be crushed according to its strength. Automatically adjust the working position. In addition to metal, stone, ceramics, glass and other hard objects that are not kitchen garbage, general garbage can also be disposed of.
Grinding wheel, the grinding wheel adds two reinforcing ribs and a reinforcement belt, which improves the wear resistance of the grinding disc. The unique function is crushed, so that all waste materials are ground with special grinding fineness, and users never worry about pipeline blockage! After the two kinds of automatic waste are coarsely ground and finely ground through the filter hole, they are separated into fine waste slurry that flows into the liquid inflow pipe. The coarse waste will stop on the crushing disc and be crushed to form powder with an inlet pipe. One job exceeds ten seconds.
low-noise grinding disc. Alloy balance point, stable performance and good balance, low motor noise and strong anti-vibration ability.
set up the motor overload protection overload protection system, if there is a foreign object stuck, the protection system will start to stop power supply, do not burn the motor, if the motor is in a protected state, you need to remove the hard object and fall off the garbage disposer, and then press the front reset button It can be fast and convenient!
The food waste disposer adopts an air switch. Prevent leakage and improve safety performance.