Домашняя ручная кровать для вытягивания шеи и поясницы растяжка спины поясничного

Описание и отзывы

Трекер стоимости

Характеристики

Household manual cervical and lumbar traction bed, spine and lumbar disc herniation stretcher

Product Name: Spinal Traction Bed	Product model: B03
Traction: | Neck 0-20KG Waist 0-80KG	Whole machine weight: 39KG
Traction stroke of cervical and lumbar spine: 0-20cm deviation ±5mm	Scope of application:  cervical spondylosis, lumbar disc herniation
Bed frame material and technology: steel pipe welding	Product specifications: 190*56*51cm
Bed surface material: leather fabric	Bed board material: wood composite board
Maximum load: about 170KG	Maximum applicable height: about 1.9 meters
Theoretical service life: 8 years	Outer packing size: 131*56*31cm

Lumbar traction method

To tie the traction belts, hang the "chest fixation belt" and the "waist traction belt" on the "tie bar" and the "tailstock" respectively, adjust the length of the two traction belts, lie on the traction bed according to the position, and tie the two traction belts. (When the traction belt is tightened, the tension should be moderate, and the tension of the traction ropes on both sides should be the same.) Start the traction and turn the handwheel counterclockwise. The movable bed surface will begin to change its angle. The traction force will gradually increase. Stop turning the handwheel when it reaches the right strength ( The traction force should be determined according to the doctor's advice and tolerance level, so that the traction force is maintained at a fixed value. After the traction is over, turn the handwheel clockwise to relax the traction, and get out of bed after a few minutes of rest in the original position. Warm reminder. After traction of the lumbar spine, it is best to fix the waist with the waist circumference to consolidate the effect

Cervical traction method

Tighten the lumbar traction belt and hang the "waist traction belt" on the tailstock, adjust the length of the traction belt, and tie it tightly (the traction ropes on both sides of the traction belt must be the same in tension), wear the cervical vertebra traction belt and wrap the neck traction belt On the neck, stick the Velcro firmly, and hang the other end on the tie rod (adjust the height of the tie rod). Traction operation is the same as a lumbar traction. After the traction, you should rest for a few minutes before getting out of bed. The traction force, please follow the doctor’s advice

Whole body traction method
Put on the ankle traction belt, put the "ankle traction belt" on the ankle, glue the nylon buckle, and hang the other adjustment belt on the tailstock. Put on the neck traction belt. Put the "neck traction belt" on the neck. The Velcro is fastened, and the traction operation and lumbar traction box are planned on the other end. After the traction is finished, you should rest for a few minutes before getting out of bed. The traction force is the size of the traction. Please follow the doctor’s advice.