1.Conform to the provisions and requirements of  IEC 62196.

2.High compatibility. It can charge all EVs with Type 2 inlets, correctly and effectively

3.Easy operation. Simply connect the plug with the EV’s inlet, then the charger will automatically detect the connection status and handshaking protocol automatically, and starts charging

4.Switchable currents. Customers can choose an appropriate charging current according to the demand

5.High security. It has passed all tests of TUV. There are all kinds of protective measures to ensure the safety for every user

6.Containing the intelligent chip. It can automatically repair minor charging problems while charging. When a fault occurs, the lights will 7.blink in different ways to indicate different problems.

8.You are able to install the charger indoor or outdoor. Firmly locking the charger on the installation backplane can prevent theft.

9.We are a factory providing OEM/ODM services

1. Firstly, the most important step is to make sure the charger is well connected to the power.
2. Secondly, use the integrated Type 2 charging cable plug to connect the charging station with your electric vehicle.
3. Once the charging cable has clicked in place you are ready to start the charge.
4. Also, there is the option to activate the charging station .How to stop the charging
1. Firstly, disconnect the Type 2 plug from the electric vehicle’s side when you finish charging.
2. If you wish to manually stop the charging you can do this by pressing the Emergency Button (the red button on the side of the charger) in case of an emergency.
How to check the charging status
1. You can monitor the charging process in real time from the LED screen display.

PRODUCT CARE

• Ensure your charge cable is protected against water and damp to ensure the long life of your cable.


• Ensure that your charging cable is not twisted or excessively tightly bent during cable storage.


• Always store the cable in a dry, clean place. Plug to plug cables should be removed from the charge unit when not in use. This will also protect the charge unit from damp and dust.


• Dust caps should always be replaced when cable is not in use.


• It is advisable to periodically clean the plug pins with a dry, clean cloth. This will remove any damp or dust particles which will cause damage.

DO NOT drive over your cable or plugs or continually drop the plugs.

• We recommend your charge your vehicle in the following sequence

CHARGE STATION

• First Plug the Male Charger Plug into the Charge Station then Female Plug into your Vehicle.


• When finished Charging disconnect the Vehicle Plug first, then the Charger Station Plug

CONTACT US >