1200 г. теплогибочный автомат с воздушным охлаждением для горячей формовки 1 мм тонкий 6 толщин нагревательный Сухой Нагреватель автоматический гибочный станок акриловых

Описание и отзывы

Трекер стоимости

Характеристики

 

Product name	Acrylic automatic bending machine
Application materials	PVC, PE, PP, PET, HIPS and other plastic materials
Positioning mode	cylinder automatic positioning mode
Processing thickness	0.8-6MM
System configuration	precision mechanical control
Temperature adjustment	0-300℃
Cooling system	equipped with water circulation cooling and air cooling system
Foldable angle	30-175 degrees, adjustable
Double pipe spacing	(150MM-550MM) adjustable
Application	Used in the hot bending process of plexiglass, acrylic, plastic board, PC, PVC, PP and other materials.
Operation mode	button panel display operation + foot control start configuration

 

Scope of application: used for acrylic, plexiglass, PC PVC PE PS and other plastic sheet, craft products, decorative lighting jewelry hot bend.

Main advantages of automatic bending machine:
1. High processing efficiency, mass production, and labor saving.
2. Configure the button operation panel to select the automatic and manual two-state bending, which is simple and practical.
3. New configuration, high-strength molding device, set heating time and temperature, and instant automatic bending is completed.
4. This machine is widely used to meet the bending needs of different angles.
machine performance characteristics:
1. The machine water cooling system is made of 304# stainless steel material to ensure that it is not deformed for a long time.
2. The machine is equipped with an automatic alarm device for water temperature to remind you to change the water source.
3. Infrared constant temperature heating method, the workpiece is evenly heated, instantly softened and bent, and cooled and formed.
4. This machine can fold 2 corners at the same time and fold 180 degrees at the same time. It can be controlled by a single work surface and humanized design.
automatic bending machine installation and operation methods:
1. Before using the machine, read the instructions in detail, and follow the power supply instructions for 380V or 220V. It must be used according to the relevant electrical regulations for reliable grounding.
2. Installation environment: The equipment should be installed on a flat, well-ventilated ground.
3. It is necessary to configure a 2.2KW air compressor or pipeline compressed air. The minimum guarantee is 0.6Mpa and the air pipe interface is 8MM.