3.7kw Spindle CNC Router Motor 220V 380V Machine Tool ER20 Dia100mm Inverter 4kw For Milling

Описание и отзывы

Трекер стоимости

Характеристики

 

 

Main Application:

Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)

Product Features:

1. 3.7KW 220V 13A / 380V 9A ER20 Water Cooled Spindle 4bearings

2. 3.7kw 220V or 380V VFD Inverter

3. 100mm Mount Bracket

4. 80w Water Pump

5. 4m Tube

6. 8Pcs ER20 Chuck

7. 4Pcs Plate

 

1. P4 angular contact bearings ,2×7002C P4 DT & 2×7002C P4 DT,increase spindle life. (New type,4 bearings)

2. Longer length make the torque bigger,more powerful.

3. Carefull assembly make the spindle more precisional.

4. Precision 0.01mm.Coaxial degree less than 0.0025mm

5. We have certificates and high-quality products can stand the test! ! !

Product Parameters:

1. Size: 100x260mm

2. Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

3. Cooling: Water cooling 4. Power Interface: Optional H17-4 pins waterproof air plug. The air plug marked "1", "2", "3", "4", "1", "2", "3" were connected to inverter (U, V, W),

4. Connected inverter ground. (Pay attention! Our spindle "4" connecting to GND, promised personal safety !!)

5. Power: 3.7kw

6. Voltage: 220V 12A / 380V 9A

7. Frequency: 0-400Hz

8. Speed: 0-24000rpm

9. Runout Off: 0.01mm

10. 4pcs angular contact ball bearings

11. Bearing Type: 2 × 7002C P4 DT & 2 × 7000C P4 DT

12. Water Cooling ER20 collet chuck

13. Grease Lubrication

Features:

1. Adopt full sandblasting appearance treatment

2. Slot design, easy to lock the spindle

3. The cast aluminum has higher precision and is more durable

4. Scientific casting, stronger earthquake resistance

Product Parameters:

Diameter: 100mm

Material: Cast Aluminium

1. Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.

2. Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth.

3. Cast aluminium fixture is much heavier than aluminium profile fixture. Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.

Note: Must be used in the water.

Must cut off the electricity once the product works improperly and must maintain it after lifting it from the water.

Features:

Type: ER20 High accuracy collet

Material: Steel

Quantity: 8Pcs

Precision: ≤ 0.008mm

Hardened & Precision ground

Widely used in boring, milling, drilling, CNC milling machine wire tapping,engraving spindle machines,machining centers and other processing.

Product	CNC Water Cooled Spindle Motor
Power	3.7kw