ЧПУ шпиндель мотор 3.5kw 3.2kw металл с водяным охлаждением шпинделя 220V 380V 4kw инвертор ER20 для металлорежущие станки маршрутизатор машина

Main Application:

Metal engraving and milling, low speed and high torque. can engrave on gold,silver,copper, aluminium,steel,Pb etc soft metal surface working.

Product Features:

1. 3.2KW 380V (6.4A) / 220v (11A) ER200.8NmWaterCooled Spindle 4bearings

3.5KW380V (7A) / 220v (12.1A) ER200.8NmWater Cooled Spindle 4bearings

2. 3.5kw/ 3.2kw 220V or 380V VFD Inverter

3.Quantity: 8Pcs(ER20)

4. 4Pcs Plate

Features:

1. 3.5KW 380V (7A) / 220v (12.1A)ER200.8Nm400HZWater Cooled Spindle 4bearings

3.2KW380V (6.4A) / 220v (11A) ER200.8Nm400HZWater Cooled Spindle 4bearings

2. P4 angular contact bearings ,2×7002C P4 DT & 2×7002C P4 DT,increase spindle life. (New type,4 bearings)

3. Longer length make the torque bigger,more powerful.

4. Carefull assembly make the spindle more precisional.

5. Precision 0.01mm.Coaxial degree less than 0.0025mm

6. We have certificates and high-quality products can stand the test! ! !

Parameters:

1. Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

2. Cooling: Water cooling 4. Power Interface: Optional H17-4 pins waterproof air plug. The air plug marked "1", "2", "3", "4", "1", "2", "3" were connected to inverter (U, V, W),

3. Connected inverter ground. (Pay attention! Our spindle "4" connecting to GND, promised personal safety !!)

4. Power: 3.5kw / 3.2kw

5. Voltage: 220V 12.1A 380V 7A  /220V 11A380V 6.4A

6. Frequency: 0-400Hz

7. Speed: 0-24000rpm

8. Runout Off: 0.01mm

9. 4pcs angular contact ball bearings

10. Bearing Type: 2 × 7002C P4 DT & 2 × 7000C P4 DT

11. Water Cooling ER20 collet chuck

12. Grease Lubrication

Parameters:

Power: 4kw

Input Voltage(Phase): 220v(1 Phase)/380v(3 Phase)

Output Voltage(Phase): 220v(3 Phase)/380v(3 Phase)

Input Frequency: 50/60Hz

Input Current: 220v(15A) 380v(8A)

Output Current: 220v(22A) 380v(12A)

Output Frequency: 400Hz

Control Method: V/F control; Open-loop flux vector control

Features:

1. Control Mode is SPWM,it is very easy to use and convenient

2. Protection functions are very strong,

3. Fin over-heat protection,

4. Overload protection,

5. Fuse protection,

6. Restart after instant stop,stall protection.

7. Powful function

Features:

Type: ER20 High accuracy collet

Material: Steel

Quantity: 8Pcs(ER20)

Precision: ≤ 0.008mm

Hardened & Precision ground

Widely used in boring, milling, drilling, CNC milling machine wire tapping,engraving spindle machines,machining centers and other processing.

Features:

1. Adopt full sandblasting appearance treatment

2. Slot design, easy to lock the spindle

3. The cast aluminum has higher precision and is more durable

4. Scientific casting, stronger earthquake resistance

Product Parameters:

Diameter: 100mm

Material: Cast Aluminium

1. Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.

2. Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth.

3. Cast aluminium fixture is much heavier than aluminium profile fixture. Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.

 

Parameters:

1. Power: 80w

2. Maximum Flow: 3500L / H

3. Lift: 3.5m

4. Voltage: 220V

5. Frequency: 50Hz

6. Nozzle: 6 / 8mm(Send by default 8mm, if you need other caliber, please note or contact us)

Features:

1. High Lift ,Large Flow Rate

2. Highly Durable

3. Excellent Insulation

4. Can cool the machine quickly

5. Good quality and long life

6. Big strong power

The shell is made of high quality plastic, which is anti corrosive and high durable.Pumps have excellent insulation thanks to the motor bearing completely sealed.Pumps combione pumping, filtered,oxygen and fountains in one.

Note: Must be used in the water.

Must cut off the electricity once the product works improperly and must maintain it after lifting it from the water.