RG402/RG141 cable assembly jumper with N male and SMA connector

 Jumper Cable of different connector series can be assembled as either straight or angle versions by using the corresponding clamps.With only one combination connector and the different cable clamps,a variety of connectors can be produced allowing a reduction in stock-levels.The technical specifications can be obtained from the descriptions in the respective chapters for each series.

Note: connector and cable type,length an be changed based on customer's requirements.

1) RF coaxial cable assemblies
2) RF connector with Andrew / LMR / RG cable series
3) Connector type: N, L29 (7/16), SMA, SMB, MCX and others
4) Cable type: FSJ1-50A (1/4''), FSJ2-50 (3/8"), LDF4-50A (1/2"),
LDF5-50A (7/8"), VXL5-50 (7/8"), LMR100, LMR195, LMR200, LMR240,
LMR400, LMR500 and LMR600
5) OEM / ODM orders are welcome

Interface

According to:IEC60169-16 / IEC60169-10

Electrical

1. Characteristic Impedance:50ohm

2. Frequency Range:DC-3GHz

3. VSWR:≤1.12

4. Dielectric withstanding voltage:≥1500RMS,50Hz,at sea level

5. Dielectric Resistance:≥5000MΩ

6. Contact Resistance:Outer Contact≤0.5mΩ ;Center Contact≤1.0mΩ

Mechanical

1.Durability :Mating cycles ≥500

2.Material and plating:

   Body Material: Brass  Plating: Tri-alloy/Ni

   Insulator Material: PTFE

   Center Conductor Material:Brass /Phosphor Bronze Plating: Ag/Au

Environmental

1.Temperature Range:-40℃~+85℃

2.RoHS Compliant: Pass

Note:

All products appearance,technical performance and electroplating can be customized according to your requirements.