When you open the package for the first time, you may find that there is residual water around the water tank. This is the water left by the factory inspection machine and will not cause any hygiene problems.1. Put the machine on a flat and stable surface such as a table to avoid personal injury caused by the machine tipping over during work
2. Take out the water tank, pull out the cap of the water bottle upwards, fill the water tank with cold water with a water cup, press the cap down tightly, and put the water bottle into the machine.
3. After use, wait for the water to cool and pull out the bottom waterproof plug to release the remaining water. When opening the waterproof plug, please hold the appliance to prevent hot water from spilling on your hands and scalding.
4. It is best to use distilled or purified water
Maintenance
1.Clean it once a month and remove the dust on the power plug. When cleaning, add clean water to the water bottle, then put the water in the body, but the machine back horizontally, and repeat the draining step 2 to 3 times.