Epoxy resin 113AB-2 is two components green epoxy flooring system, can be cured in normal temperature, with good flowing property to self-leveling, natural defoaming feature.113AB-2 specially designed for primer floor coating.
Metallic Epoxy Flooring & Coating System Kit--20㎡/200Sq.ft
-- It is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications:
--High build color coat for a host of decorative concrete systems;
--The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable;
--Ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired;
•Designed for commercial, industrial, and residential concrete, cement, wood and tile floor coating
•Mix with Metallic Color Pigments to have metallic effect epoxy floor coating and countertops coating
•Waterproof Barrier, Against Moisture, Impact Resistance, Scratch Resistance, Anti-slip and UV Stable
•Designed for commercial, industrial, and residential concrete ,cement ,wood and tile Floor coating, can apply directly over Epoxy Middle Coating to have a high gloss protective finish.
Finished product display
Finished product display
Finished product display
Features
Properties before Hardening
Part
113AB-2
113AB2
Color
Transparent
Transparent
Specific gravity
1.15
0.97
Viscosity (25℃)
2000-4000CPS
100 MAXCPS
Mixing ratio
A: B = 100:33(weight ratio)
Hardening conditions
25 ℃×8H to 10H or 55℃×1.5H (2 g)
Usable time
25℃×40min (100g)
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used. 2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption. 3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use. 2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately. 3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap. 4, Keep away from children. 5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment. 2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C degree.
For different needs, we have more than 500 products, there is always one suitable for you
5kgs per bottle; 20kgs per carton 20kgs per barrel 200kgs per barre
Company Information
guangdong JINHUA Electronic Materials Co., Ltd. is specialized in epoxy resin and hardener with Secondary processing of high-tech enterprises.It is one of the most professional supplier of epoxy resin adhesive in current.And it is the most competitive, our company integrates R&D,development, production, sales and service into one of the professional firms. It has a more than 2000 square meter factory at pressent. Equipment introduction adopts international advanced technology and standards. Refer to excellent formula domestic and abroad, with high-performance raw materials in the United States, Japan, Germany and other places. All aspects of production have been strictly performance, environmental protection, health indicators test, and through the national authorities to detect certification,meet in the domestic industry-leading level.
Our company mainly produces crystal glue, epoxy resin adhesive, electronic potting glue, solar accessories, board resin glue, adhesive and other special grinding and etc...
Our company all stuff will uphold "honesty, harmony, innovation, rigorous" enterprise culture, adhere to the "management step by step, the eternal development" concept, constantly strive to forge ahead, innovation, all for customer needs as the center; all customers for the development of power; all customer satisfaction as the starting point; Jinhua hand in hand together with you, create brilliant!
FAQ
1, Why Choose Jinhuaglue?
1) Jinhuaglue owns ISO9001-2008 audited factroy of 3500sqm, all the materials are offered by factory directly. 2) Jinhua has R&D team, we accept OEM, and small order is acceptable 3) Jinhua has already ship to over 30 countrys, aboudant experiecnce on the exporting. 4) Jinhua with output of tons per day, ensure the fast on time delivery 5) Jinhua keeps all the samples for each shipment, so that to make the quality trackable.
2, What Kind of Quality Certificate Jinhua has?
1) REACH, 2) RoHS 3) UL 4) SGS 5) MSDS
3 Do Jinhua has MSDS for shipment?
Yes, we do have MSDS for shipment all our epoxy and PU resin Regarding Take Delivery Please check the goods before signing the goods, check the quantity, if there is any damage or not, please contact our company,we will our best to solve it!
Payment Terms We support T/T,D/A,D/P,Western Union,Paypal or others convinent for customers that I could accept payment terms!
