Двухваловый стан для резиновые прокатный с открытым

Instrument introduction: The open mixer is a kind of mixing plastic equipment that was used earlier in the plastic product production plant. On the calender production line, the open mill is in front of the calender and after the mixer. Its function is to mix and plasticize the uniformly mixed raw materials to provide a more uniformly mixed and plasticized melt for the calendered plastic products. When producing cable materials, the open mill can directly smelt and plasticize the powdery materials mixed according to the formula into molten materials, and then press and mold them into sheet-like tapes, so that the pelletizer can cut them into pellets. On the floor leather production line, it can directly provide a primer coating that is uniformly mixed and plasticized for cloth leather. The recycled waste plastic film (sheet) can also be re-plasticized on an open mill.

The main technical parameters:

1. Size: 12 inches

2. Type: open mixer

3. Working volume: 50L

4. Screw speed: 21r/min

5. Production capacity: 100KG/H Technical scheme of precision instrument testing equipment

6. Roller spacing: 0-10mm

7. Alias: Rubber mixer, open mixer, two-roller

8. Scope of application: silicone rubber mixing and silicone rubber color matching

9. Screw diameter: 300

10. Screw length to diameter ratio: 800

11.Main motor power: 15KW

12. Overall dimensions: about 2.7*1.15*1.5M

13.Weight: about 2700KG

Product description:

1. Drum material: alloy hard steel

2. Drum speed: fixed speed

3. Roller speed ratio: 1:1.25

4. Roller treatment: hard chrome plating mirror treatment on the surface of high hardness, no sticky material, no delamination

5. Roller spacing: 0.02~18mm adjustable

6. Safety device: 4 touch-type emergency stop devices (with reversal function, safety first, humanized design, operating workers will always be safe and free of work injuries) 7.Motor: 15KW 6 pole 1 unit.

8. Power rate: 15KW

9. Volume: (W×D×H) 2700*1150*1500mm In the case of the same function, the volume is smaller than the traditional process, reducing the waste of area

10. Roller lubrication: The wear-resistant bearing has a large contact area and prolongs its service life.

11. Mixing capacity: according to material

12. Whole machine weight: 3000kg

13. Roller temperature: water cooling

14. Reducer: ZQ250