Новая стильная Автомобильная восковая губка-аппликатор BONNO автомобильный детейлинг Эва ручная Подушка блестящее нанесение лака для

BONNO 3' 4' 5' 6' 7inch Care Auto Wheel Kit Polisher Polishing Pad Foam Waxing Set Car Buffing Sponge

6-inch (125mm) Compound Buffing Sponge Pads Buffing Pad for Car Buffer Polisher Sanding,Polishing,Waxing, 5 Pieces

Polishing Pads Kit. The set 5pcs 6' Sponge Polishing Pads with different softness of yellow, orange, blue, white, black pads to
meet different polishing and waxing requirements of your car. This Professional foam pad buffing, polishing and finishing system
with clear grid stripe,can remain polishing liquid to achieve better polishing effect. It can be used for any compound, polish,
wax or sealant for removing swirl marks, scratches, oxidation and marring to clean and improve the lightness. The Prime quality,
sponge pad, bendable, washable and reusable, can be used in pneumatic or electric polishing machine. Used for automotive car
detail polishing. Easy operation and installation .With abrasive stick backing, you can change the pads just in seconds and easily
replace the sponge or wool pad.

Size: 3inch=7.62cm (5pcs in a opp bag)

4inch=10.16cm (5pcs in a opp bag)

5inch=12.7cm (5pcs in a opp bag)

6inch=15.24cm (5pcs in a opp bag)

7inch=17.78cm (5pcs in a opp bag)

Product features: good toughness, strong wear resistance
【Instructions for use】:
1: Suitable for waxing, polishing and sealing glaze
2: Air or electric polishing machine can be used
3: When the product is waxed, it is recommended to use 1000-1500 rpm
4: When product polishing, it is recommended to use 1500-2000 rpm
5: When cleaning the product, only use cold water 15-25 degrees
In order to ensure the polishing effect, the vehicle must be thoroughly cleaned before waxing

●Waxing, waxing can be divided into manual waxing and mechanical waxing, manual waxing is simple and easy, and mechanical waxing effect
The rate is high. Whether it is manual or mechanical waxing, ensure that the paint is evenly applied. Waxing by hand

Product Name: Car Polishing Foam Size: Various Unit: Pieces.

Efficacy: It removes the swirl pattern produced by rough polishing, and it is used with the mirror reduction plate for better effect!

Car cleaning: In order to ensure the waxing effect, the vehicle must be thoroughly cleaned before waxing.

●Waxing, waxing can be divided into manual waxing and mechanical waxing. Manual waxing is simple and easy, and the mechanical waxing efficiency is high. Whether it is manual or mechanical waxing, ensure that the paint is evenly applied. When waxing by hand, first apply an appropriate amount of car wax on the sponge (special waxing sponge), and then apply it back and forth in a certain order in a straight line. Each application should have a 1/5-1/4 overlap with the upper coating area , To prevent leakage and ensure even application. When mechanical waxing, apply car wax to the sponge of the waxing machine. The specific application process is the same as that of manual application. It is worth noting that the application on the edges, corners and edges should not exceed the paint surface, and manual application is easier to grasp .

●Polishing. According to the instructions of different car waxes, polishing can be carried out in 5-10 minutes after application. When polishing, follow the principle of waxing first, to ensure that the polished car watch is not contaminated. The polishing operation usually uses non-woven wool to reciprocate linearly, and press it with appropriate force to remove the remaining car wax.

Pay attention to the following issues when you are self-reliant and waxing by hand:
1. The waxing working environment is clean and well ventilated. If conditions permit, a special waxing workshop can be set up.
2. The car should be waxed in a cool place, otherwise the temperature of the car surface will be high, and the adhesion of the car wax will decrease, which will affect the waxing effect.
3. When waxing, the running route of the manual sponge and the waxing machine sponge should be reciprocating in a straight line. It is not suitable to apply in a circular shape to prevent strong circular diffusion due to uneven coating.
4. When waxing, you should follow the principle of up and down first, that is, apply the roof, front and rear covers, and sides of the body first.
5. When waxing, if the same color as the car paint appears on the sponge, it may be that the paint surface has been damaged. Stop waxing and repair it immediately.
6. The polishing operation should be carried out within a specified time after the waxing is completed, and the polishing movement is also linear reciprocating. Unpolished vehicles are never allowed to drive on the road, otherwise polishing will be carried out, which may cause scratches on the paint surface.
7. After polishing, check carefully to remove residual car wax from license plates, car lights, doors, etc. to prevent corrosion.
8. After waxing, equipment and supplies should be properly cleaned and stored properly.
9. It is necessary to master the frequency of waxing. Due to the different driving and parking environments of the car, the waxing interval should not be step by step, but you can wipe the body paint with your hands. If there is no smooth feeling, you should wax again