Пульсоксиметр на тонкопленочных транзисторах с

Blood Oxygen Monitoring Spo2 Finger Clip Pulse Oximeter

1. Display parameters: blood oxygen SPO2 value (below 94, there will be an alarm prompt, the number is always flashing), heart rate pulse PR value (the heart rate is less than 50 or more than 130, there will be an alarm prompt, the number is always flashing), bar shape Figure

2. Display screen: the product adopts monochromatic LED screen display

3. Energy saving and environmental protection: The product has low power consumption, and the two AAA batteries can be used continuously for more than 48 hours

4. Voltage warning: when the battery voltage is too low, it may affect normal use, there will be a low voltage warning prompt

5. One-key boot: One-key boot function, simple operation

6. Automatic shutdown: When no signal is detected, the product will enter the energy-saving state and automatically shut down after 16 seconds.

7. Advantages: Integrating blood oxygen probe and processing display module, the product is simple to use, low power consumption, small in size, light in weight and easy to carry

Product specifications:

1. Complete certification: CE, national quality inspection report (if necessary, you can contact customer service)
2. Invoices can be issued (a separate fee is required), and you can contact customer service if you need a picture package!
3. Bare metal specifications: 57MM long * 31MM wide * 33MM high
4. Bare metal weight: 37g (without battery)
5. Bare metal weight: 60g (with battery)
6. Specification with packing box: 93MM*60MM*40MM
7. Weight with packing box: 80g (1 manual, 1 lanyard)
8. 100 inner boxes and outer box specifications: 48.2*31.7*17.7CM
9. Weight of 100 inner boxes and outer boxes: 8.4KG