Цена по прейскуранту завода-изготовителя производитель поставщик адсорбционный осушитель воздуха для компрессора поглощения сжатого (HRB-Z700 75m 3/мин

Product details

working principle: 

    The blower heated regenertative adsorption dryer(Zero gas consumption) is composed of two adsorption towers which work alternately, including blower, electric heater system, cooler system, switching valve system, control system, etc. In the whole working cycle, one adsorption tower is in adsorption, the other adsorption tower is in regeneration desorption. The zero air consumption regenerative adsorption dryer with air blast heat is based on the micro air consumption regenerative adsorption dryer with air blast heat, and a cooler is added. The ambient air inhaled by the blower is heated by the heater to desorb the moisture from the adsorbent. In the cooling stage, the hot air circulates through the cooler and the regeneration tower. The regeneration tower is cooled and desorbed by continuous closed cycle. The whole regeneration process does not consume compressed air.            

    Compared with the same period of last year, no heat regeneration dryer can save more than 70% energy. Such remarkable energy-saving benefits, in today's energy shortage, the zero gas consumption regeneration adsorption dryer with blast heat is worthy of our vigorously promotion.

Product features

*Through the RS485 communication interface MODBUS-RTU communication protocol (if other communication protocols are adopted, they shall be determined separately through negotiation), the operation parameters, remote start / stop control of the acquisition equipment, monitoring of the operation status and various fault information can be uploaded and realized;            

*Energy saving: the self-developed ebz200-2 multi-core drive can save more than 10% of the comprehensive energy consumption compared with the fixed cycle mode; the dew point energy-saving control can be selected, which can extend the adsorption time of a single tower and reduce the comprehensive energy consumption by more than 30% under the condition of load fluctuation;            

*Customized high performance adsorbent, designed 20% filling surplus;            

*High performance pneumatic valve, reliable performance, long service life;            

*Taiwan brand high pressure blower;            

*International brands such as Schneider of France are selected as electrical components.            

*304 stainless steel control gas pipeline, beautiful and generous;            

*The special designed diverter has the advantages of high adsorbent utilization rate and small gas pressure loss;            

*Siemens PLC controller, Kunlun Tongtai 7-inch large screen touch screen, dynamic monitoring operation process;            

*The most comprehensive signal acquisition, monitoring and display, including: air inlet temperature, heater temperature, regeneration tail gas temperature, a / b tower pressure, blower pressure, dew point temperature (optional)

PRODUCT CATEGORIES

FAQ