Спрей PTFE антипригарное покрытие для посуды
US $5.87-$10.56
Термостойкое покрытие из эпоксидной смолы для деревянного речного
- Категория: Building Coating >>>
- Поставщик: Dongguan,Magic,Composite,Materials,Co.,Ltd.
Поделиться:
Описание и отзывы
Трекер стоимости
| Месяц | Минимальная цена | Макс. стоимость |
|---|---|---|
| Sep-19-2025 | 0.72 $* | 0.21 $* |
| Aug-19-2025 | 0.49 $* | 0.27 $* |
| Jul-19-2025 | 0.78 $* | 0.6 $* |
| Jun-19-2025 | 0.78 $* | 0.95 $* |
| May-19-2025 | 0.66 $* | 0.94 $* |
| Apr-19-2025 | 0.15 $* | 0.10 $* |
| Mar-19-2025 | 0.6 $* | 0.74 $* |
| Feb-19-2025 | 0.4 $* | 0.37 $* |
| Jan-19-2025 | 0.27 $* | 0.25 $* |
Характеристики
Product Description
How to use Magic Ultra Clear Table Top Epoxy Coating /Extremely Durable Table Top Finish?
No experience needed.Get a beautiful crystal-clear surface in just a few easy steps.
Step 1: Measure Epoxy
Clear Epoxy is a two-part, epoxy coating that is mixed at a 3 to 1 ratio. Pour an equal amount of hardener and resin into a new
container. It is important that you use a new container for each batch that you mix so that the next batch does not get
contaminated from the remnants of curing epoxy in the previous container.
Step 2: Mix Epoxy
Mix thoroughly with our mixing drill bit to ensure that the batch is completely blended.
Step 3: Paint on a Seal Coat of Epoxy
On porous material such as wood, you will need to paint on a seal coat of the same epoxy first to seal any pores in the surface.
This prevents air bubbles from forming in the following flood coat. Not all surfaces require a seal coat. Contact customer service
if you are unsure if your project will need a seal coat as you will need to figure the seal coat into your epoxy order to make
sure you have enough product.
Step 4: Pour Epoxy Flood Coat
Pour the epoxy onto the surface working your way down the length of the area. The epoxy self levels so there is no need to move it
around with any tools. The epoxy coat can be allowed to flow over the sides which will create a coating on the vertical edges. The
epoxy that drips over will form bumps about 1/2 inch underneath the lip of the edge. These drips can be sanded off once the epoxy
has cured.
*Multiple flood coats can be applied to cover over embedded objects. Just pour a new flood coat every 4 hours.
Step 5: Pop Air Bubbles with a Plumber’s Torch or Heat Gun
Once you finish pouring the epoxy, you will need to pop air bubbles using a plumber’s torch or a heat gun (not a hair dryer). This
process is the easiest step as it only takes about 30 seconds to 1 minute to do. Keep the torch or heat gun a few inches from the
surface and simply wave it back and forth until you cover the entire distance of the surf
No experience needed.Get a beautiful crystal-clear surface in just a few easy steps.
Step 1: Measure Epoxy
Clear Epoxy is a two-part, epoxy coating that is mixed at a 3 to 1 ratio. Pour an equal amount of hardener and resin into a new
container. It is important that you use a new container for each batch that you mix so that the next batch does not get
contaminated from the remnants of curing epoxy in the previous container.
Step 2: Mix Epoxy
Mix thoroughly with our mixing drill bit to ensure that the batch is completely blended.
Step 3: Paint on a Seal Coat of Epoxy
On porous material such as wood, you will need to paint on a seal coat of the same epoxy first to seal any pores in the surface.
This prevents air bubbles from forming in the following flood coat. Not all surfaces require a seal coat. Contact customer service
if you are unsure if your project will need a seal coat as you will need to figure the seal coat into your epoxy order to make
sure you have enough product.
Step 4: Pour Epoxy Flood Coat
Pour the epoxy onto the surface working your way down the length of the area. The epoxy self levels so there is no need to move it
around with any tools. The epoxy coat can be allowed to flow over the sides which will create a coating on the vertical edges. The
epoxy that drips over will form bumps about 1/2 inch underneath the lip of the edge. These drips can be sanded off once the epoxy
has cured.
*Multiple flood coats can be applied to cover over embedded objects. Just pour a new flood coat every 4 hours.
Step 5: Pop Air Bubbles with a Plumber’s Torch or Heat Gun
Once you finish pouring the epoxy, you will need to pop air bubbles using a plumber’s torch or a heat gun (not a hair dryer). This
process is the easiest step as it only takes about 30 seconds to 1 minute to do. Keep the torch or heat gun a few inches from the
surface and simply wave it back and forth until you cover the entire distance of the surf
Specification
Technical Data | ||||
Item | 136-2A | 136-2B | ||
Color | Transparent | Transparent | ||
Specific gravity | 11.12±0.1 | 0.8±0.1 | ||
Viscosity (25℃) | 3000±500 mpa.s | 150±30 mpa.s | ||
Mixing ratio | A:B=3:1(Weigh Ratio) | |||
Hardening conditions | 25℃×6-8h（2g） | |||
Usable time | 25℃×30-45mins（100g） | |||
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Company Profie
FAQ
Payment method and after-sales service:
1. The company's payment method supports T/T or Western Union
2. After delivery, our company has professional after-sales customer service personnel to track the in-transit status of products for you, so as to ensure the safety and fast delivery of products to customers.
1. The company's payment method supports T/T or Western Union
2. After delivery, our company has professional after-sales customer service personnel to track the in-transit status of products for you, so as to ensure the safety and fast delivery of products to customers.
3. Senior engineers can enjoy a full range of quality one-to-one service for free and give professional advice in the production and operation process. The company's professional engineers can also according to customer requirements, research and development of a variety of different performance of products, curing conditions, temperature grades, color, surface gloss, transparency, hardness and other aspects, to make appropriate deployment, to meet customer's different needs!
4. Our company promises that if there is any quality problem in the normal operation, we will replace the goods unconditionally, and our company will bear the freight incurred on the way.
4. Our company promises that if there is any quality problem in the normal operation, we will replace the goods unconditionally, and our company will bear the freight incurred on the way.
