BODO твердые панели забора белый забор виниловый

Описание и отзывы

Трекер стоимости

Характеристики

BODO® MOULDINGS are the perfect replacement of wood, with features of eco-friendly, lifetime never rot, low maintenance, moisture & termite proof, easy to install, does not promote mold or mildew, save time and labor with high energy efficiency, not easy to scratch, no painting required unless desired. When you think of moulding, we are an enduring solution for all your moulding need.

Application Photo

BODO® Bead board is the perfect choice for porch cellings and soffit applications, as well as for wainscot trim in bathrooms, laundry rooms or other high moisture interior areas.

A stylish rail can dramatically improve the look of your terrace, staircase, or porch. Bodo high- quality, low-maintenance, composite railing products is extruded pvc material, designed to make outdoor living easy, engineered for superior safety and strength, and will not rot, peel, or splinter. Boto railing is easy to install and provides both design and budget flexibility.

 

BODO® PVC FENCING

Known as vinyl fence — is an excellent, low-maintenance alternative to wood fencing. Wood fences must be treated, painted or stained on a regular basis and need to be maintained from weathering every year.

 

 

 

 

Features

Virtually maintenance free Less maintenance than a wood fence, never need sanding, staining or painting

Wide variety of styles, colors BODO® now can produce white and tan color

Easy to install Pre-assembled, no special tools required.

Adds beauty and privacy To your home or garden

Lifetime limited warranty

 

Details Kit and size

 

Install and maintenance

 

 

 

 

 

 

Step 1- Measuring and Marking Off The first step is to establish the measurements of the fence and its different sections. An equivalent area can now be measured off where the fence is going to be located using the stakes and string to create guides. The stakes for the corner posts should be a few inches past the post's final locations leaving the string to cross at the correct place. Set the posts at the same interval as the ends of the PVC fence sections. Measure for the gate and set the posts appropriately.

Step 2- Digging the Holes Dig holes for the terminal posts, diameter of the dug holes should be 10” and depth should be 1/3 of the posts length plus another 4”

Step 3- Setting the Terminal Posts Mix the concrete and work with one post at a time, pour the concrete into each hole and then lower the post into the cement. Level the post across the top with the regular level and check the vertical axis with the post level. Add more cement at this time in a manner where water will run away from the post. Tying string to the top of the inserted posts will provide you with a visual guide for inserting the line posts. These posts are set the same as the terminal posts.

Step 4- Installing the Panels Attach brackets for the PVC fencing with screws and do the same with the rail hangers. The separate panels should comfortably slide into the brackets. Screw the panels into place on the hangers.

Step 5- Installing the Gate The gate is lined up with the bottom of the fence for proper fitting. Cut the 2x4 lumber to fit the insides of the two fence posts that the gate and latch will attach to. Attach these making sure that the wood is level. Screw the hinges and latches into place then try the gate to make sure that it works smoothly.

Step 6- Finishing Up the Fence At this point, the post tops should be glued into place. Hold each in place for a minute to be sure that it is set.

Storage and Package

• BODO® PVC trim, sheet, moulding, railing and fencing products should be stored on a flat and level surface. PVC products are more flexible than wood, they may deform on uneven surfaces. Ensure that storage areas, as well as all framing and substructures, are flat and level to minimize uneven surfaces.

• Products are shipped with a protective covering. If covering has been removed, take care to keep product free of dirt and debris at jobsite. If product gets dirty, clean after installation. Care should be taken to avoid damage to the ends, edges and surfaces.

 

We provide several packings for sheet, trim board, mouldings, railing and fencing to make sure the goods are perfectly protected and easy for loading & unloading.