Леска для переработки корма сушилка небольшой емкости/сушилка домашней

Drying is an important process in the processing of expanded feed. The moisture of the feed pellets just extruded from the
extruder is very high, reaching 22% or more. It is necessary to remove more than 10% of the moisture from the drying equipment andthen cool it to ensure that it meets the qualified product quality. To achieve this requirement faster and at a lower cost.

1. Using uniformly dispersed high-performance hot air diffusion device to keep the plastic drying temperature uniform and improve drying efficiency.
2. The unique curved design of the hot air tube can avoid the accumulation of dust on the bottom of the electric heating tube to cause combustion.
3. The inside of the barrel and internal parts are all made of stainless steel to ensure that the raw materials are not contaminated.
4. The material bucket is separated from the hopper, which is convenient for cleaning and quick material change.
5. Proportional deviation indicating temperature controller can accurately control temperature.
6. With overheating protection device, it can reduce accidents caused by man-made or mechanical failure.
7. All models can be equipped with appointment timing device and heat preservation barrel.