Гибкая металлическая лента угловая со стальной алюминиевой полосой 50 мм * 30 м для украшения стен гипсокартона из Китая
- Категория: Угловые накладки >>>
- Поставщик: Qingdao,Rockpro,Composites,Co.,Ltd.
Поделиться:
Описание и отзывы
Трекер стоимости
| Месяц | Минимальная цена | Макс. стоимость |
|---|---|---|
| Sep-18-2025 | 0.46 $* | 0.84 $* |
| Aug-18-2025 | 0.94 $* | 0.19 $* |
| Jul-18-2025 | 0.65 $* | 0.7 $* |
| Jun-18-2025 | 0.67 $* | 0.86 $* |
| May-18-2025 | 0.22 $* | 0.99 $* |
| Apr-18-2025 | 0.67 $* | 0.6 $* |
| Mar-18-2025 | 0.75 $* | 0.30 $* |
| Feb-18-2025 | 0.30 $* | 0.16 $* |
| Jan-18-2025 | 0.93 $* | 0.44 $* |
Характеристики
Products Description
Title goes here.
The metal angle guard belt is made of two strips of metal belt in the center, which are firmly bonded together with perforated paper tape after special process treatment. This product can not only prevent rust for a long time, but also protect the external corner, make the external corner straight and firm, and make the edge line more smooth. It is widely used in the protection of arch, arc and corner to reduce corner wear, protect corner from impact and prolong service life.
Product base material: metal strip + paper tape
Size: 50 mm × 30 m each roll
Package: 1 roll / inner box, 10 inner boxes / carton
Product base material: metal strip + paper tape
Size: 50 mm × 30 m each roll
Package: 1 roll / inner box, 10 inner boxes / carton
Technical Paramenters
Metal Strip Types | Metal Strip Width | Products Width | Length | Weight | ||
1 | Galvanizes Steel Strip | 11mm x 2 | 50mm | 30m | 1500g | |
2 | Aluminum Strip | 10mm x 2 | 50mm | 30m | 750g | |
Product packaging
1. According to the actual length of each side, the metal angle protection belt is cut vertically with scissors to meet the
construction length requirements.
2. Apply the joint putty on both sides of the corner, fold it according to the center line of the metal corner guard belt, paste
the metal strip surface into the joint putty (one side of the metal steel strip should be pasted inside), squeeze out the
excess putty, and clean the surface with a plastering knife. During construction, the metal corner guard belt at the corner
shall not overlap, otherwise the flatness will be affected.
3. After drying, apply a layer of joint putty on the surface. If necessary, use fine sandpaper to gently polish.
Manufacturing Technique
