Низкая цена высокое качество блочная панель AAC Whatsapp + 84. 909983328 г-жа

The Ingredients:

Fly-Ash:A lot has been said about this raw material in this Project Profile itself. But this Raw material is freely available in Thermal Power plants. There are no taxes on this item whatsoever. Transportation charges are only to be attended by the entrepreneur.

Sand (65-70%): the core raw material of AAC product; the main resource of silica-aluminum components; correspond with JC409-91; the clay should less than 4%

Lime(12-20%):one of the main raw materials of fly ash AAC; the main effect is to provide efficient calcium oxide with cooperation of cement making calcium oxide react with SiO2,Al2O3 in hot water then to produce calcium silicate hydrate. Therefore, lime is also the main resource of strength. Effective calcium oxide of lime should not less than 65%, over 80% is perfect and should accord with JC/T621-1996.

Cement(8-10%): This Project aims to utilize OPC cement as main binder material. It will give faster strength to the bricks, besides giving improved consistent quality. It also ensures a better cost effectiveness for the same. Using OPC will be a standardized practice. The other prime advantages of using OPC (compared to other binders) is it's easy availability locally through nationwide Retail Network of Cement Companies.

Gypsum(1-2%):Gypsum is the foaming regulator in AAC which dispels quicklime and postpones slurry's densification.CaSO4 should be more than 70%.

Aluminum Podwer(0.074%):it is the forming agent type and recommendation for supply depend on raw materials and mix formula

What are the advantages of ALC Concrete Wall Panels compared with traditional brick building materials?

a.Cost effective - lightweight panels allow for reduced structural components and smaller lifting equipment.

b. Excellent thermal resistance performance.

c. Acoustic performance - effective sound transmission barrier between external and internal environments of the building.

d. Excellent fire rating properties.

e. No wet trades - less mess and a cleaner, safer work area.

f. Less wastage - significantly reduced waste as panels can be custom-made to length requirements.

g. Fewer waste bins and fewer crane movements.

h. Design flexibility - panels can be easily cut and routed to suit design requirements.

i. Panel lengths up to 6 meters.

j. Strong, secure and durable with corrosion-protected steel-reinforced panel

Production Line

Material dealing process:Put the fly ash or sand into the ball mill to mill via the conveyor belt, after milling, put the slurry into the slurry storage tank by slurry pump.

Batching, mixing and pouring process:The lime, cement will convey by conveyor to the dry powder measure scale to scale separately. The slurry convey by slurry pump then to the automatic scale;the power and slurry put into the mixer,pouring into the mould.

Curing process:After slurry pouring into the mould, put the mould box into the curing room with 50~70℃. After 2-3 hours curing,the blocks become solid

Cutting process:Using reversal crane carry the mould and block to demould on cutting cart. The cutting cart will take the block to level cutting machine,vertical cutting ,two sides cutting,and remove the top waste material.

Autoclaved:Finished cutting using semi-product crane carry to the front of autoclave grouped,hoisting machine or dragger will drag steam trolley into autoclave to steam,it need 10-12 hours.

Finished block dealing:Finished product out of autoclave,with separting machine to separate layer by layer.

Package:Using finished block carry hanger clamp the finished product to package line on wooden pallets,after package, then by forklift transport the finished products to piled yard according to specifications to stack.

We apply a strict quality control procedure as refer to European Standards in our factory to ensure the quality of any single block delivered to the site in the most perfect condition.
All raw materials are carefully selected from reputable suppliers. The manufacturing process is set up with a lot of automations by latest German technology in order to bring outstanding quality to our products.

Eblock Standard Dimension
In order to suit the different requirements of design, technical specifications, aesthetics as well as the functional utility of the construction works, we can customize and produce different dimensions and compressive strengths of EBLOCK blocks corresponding to TCVN 7959:2011 standard.
Based on technical requirements and design, we classify EBLOCK blocks according to size and specifications.
(Other non-standard dimensions and specifications required by the construction works can be manufactured on individual orders)
We understand hat a truly "GREEN" and Environmentally friendly product must be produced from a truly "Factory".
We have achieved some certificates, such as: VIETCERT (ISO 9001:2015), VIETCERT (ISO 14001:2015), VIETCERT (TCVN 7959:2011), VIETNAM BUILDING COUNCIL etc.

AAC PANELS
Made with cement, lime,silica sand as raw materials, with reinforcing bars treated with anti-rust coating. These panels are produced with high-temperature, and high-pressure curing.
it's a silicate plate of high performance, and has many incomparable merits like exceptional fire resistance, sound insulation, and thermal reduction. It can be used as external wall panels, partition panels (internal walls), roof panels, and floor panels.
Width: 600mm
Length: 600-6000mm
Thickness: 50-300mm per 25mm interval